Skip to main content

LoRaWAN Uplink Formats

If the gateway is configured to auto-detection of baudrates or M-Bus devices, the results will be transmitted once after boot.

Byte | 0 .. 4  | 5                        | 6                          | 7                          | 8                            |    ...         |    ...           |
     +---------+--------------------------+----------------------------+----------------------------+------------------------------+----------------+------------------+
Data |Baudrate | Number of primary slaves | Transmitted primary slaves | Number of secondary slaves | Transmitted secondary slaves | Primary slaves | Secondary slaves |

The list of primary slaves is a list of 1-byte long primary addresses of all detected devices

Byte | 0       | 1       | ... |
     +---------+---------+-----+
Data | Address | Address | ... |

The list of secondary slaves is a list of 4-byte long secondary addresses of all detected devices

Byte | 0 .. 3  | 4 ... 7 | ... |
     +---------+---------+-----+
Data | Address | Address | ... |